CARRY BAGS
A: Sturdy canvas carry bag with zip & handles. Suitable for
all flying banners and rod sets. Bag is approx. 1.5m long.
B: Round Pop-Up carry bag with
zip & handles. Suitable for
our Pop-Up banners only. Comes in 3
different sizes, small,
medium and large and is dependent on size of
Pop-Up.
C: Hard carry case (for Portable Shades only) comes with
wheels for easy transportation of your Shade Marquee.
|
|
|
|
STAKES, MOUNTS & PEGS
A: Grass / Soft Ground Stake
For all banners that are going to be used on grass,
sand or snow or any other soft surfaces.
B: Car Mount with rotating spindle
For use under a car wheel, for all size flying banners.
Approx. 1m High
C: Ground Pegs
For use with Pop-up banners or the
Portable Shade Marquees for securing into soft ground.
|
|
|
WALL MOUNTS
A: Angle Wall Mount with rotating spindle
For all banners that need to be wall mounted
on a 90 degree angle away from the wall.
B: Upright / Vertical Wall Mount with rotating spindle
For all baners that need to be wall mounted vertically.
C: Horizontal plate with rotating spindle
For use with heavy metal base plates or to mount onto
own hardware. Plate measures 120mm square
and spindle height is 150mm.
|
|
portable shade accessories
|
|
|
BASE PLATES
A: Folding stand with rotating spindle
For use indoors with small banners (2m) or outdoors using sand bags to weigh down.
B: Heavy metal base plate
- 5Kg & 10kg with rotating horizontal spindle
5Kg for use with all 2m and 10Kg for 3m & 4m flying banners,
both indoors and outdoors. Plate measures approx. 400mm x 400mm.
C: Rubber weight
- 15Kg For use with our Portable Shade Marquees only.
Use as extra support in windy weather.
|
|
| | | | | | | | | | | | |
